Hyper-V Server 2008 R2 BSOD STOP 0x0000007E

Hi Guys/Girls

I'm having a problem with my clean install of Hyper-V Server 2008 R2.

Once i enable the 2 options in the BIOS for virtulisation i get a bsod with
STOP 0x0000007E error message. The server is an HP DL360 G5.

I have found the KB article 974598, and i tried installing this hotfix on
the server but is says it not applicable for this machine.

Any ideas?

Make sure that you have installed all the current HP firmware upgrades
available for your system, including for the RAID controller and for the
iLO.

--
Charlie.
http://msmvps.com/blogs/russel




"Simon" <Simon@discussions.microsoft.com> wrote in message
news:90031957-5BD0-4A49-B041-05E6F4B2A6EA@microsoft.com...
> Hi Guys/Girls
>
> I'm having a problem with my clean install of Hyper-V Server 2008 R2.
>
> Once i enable the 2 options in the BIOS for virtulisation i get a bsod
> with
> STOP 0x0000007E error message. The server is an HP DL360 G5.
>
> I have found the KB article 974598, and i tried installing this hotfix on
> the server but is says it not applicable for this machine.
>
> Any ideas?

I have checked with the latest firmware cd (8.30) from HP, and everything is
up-to-date.

"Charlie Russel - MVP" wrote:

> Make sure that you have installed all the current HP firmware upgrades
> available for your system, including for the RAID controller and for the
> iLO.
>
> --
> Charlie.
> http://msmvps.com/blogs/russel
>
>
>
>
> "Simon" <Simon@discussions.microsoft.com> wrote in message
> news:90031957-5BD0-4A49-B041-05E6F4B2A6EA@microsoft.com...
> > Hi Guys/Girls
> >
> > I'm having a problem with my clean install of Hyper-V Server 2008 R2.
> >
> > Once i enable the 2 options in the BIOS for virtulisation i get a bsod
> > with
> > STOP 0x0000007E error message. The server is an HP DL360 G5.
> >
> > I have found the KB article 974598, and i tried installing this hotfix on
> > the server but is says it not applicable for this machine.
> >
> > Any ideas?
>
> .
>

Hi,

The update is applies to full version of windows Server 2008. not applicable
for hyper V 2008 R2 2 (free edition). You can try windows update and patches
the system. Besides that, may be you should upgrade your BIOS and download
the latest chipset.

ericlaiys

"Simon" wrote:

> I have checked with the latest firmware cd (8.30) from HP, and everything is
> up-to-date.
>
> "Charlie Russel - MVP" wrote:
>
> > Make sure that you have installed all the current HP firmware upgrades
> > available for your system, including for the RAID controller and for the
> > iLO.
> >
> > --
> > Charlie.
> > http://msmvps.com/blogs/russel
> >
> >
> >
> >
> > "Simon" <Simon@discussions.microsoft.com> wrote in message
> > news:90031957-5BD0-4A49-B041-05E6F4B2A6EA@microsoft.com...
> > > Hi Guys/Girls
> > >
> > > I'm having a problem with my clean install of Hyper-V Server 2008 R2.
> > >
> > > Once i enable the 2 options in the BIOS for virtulisation i get a bsod
> > > with
> > > STOP 0x0000007E error message. The server is an HP DL360 G5.
> > >
> > > I have found the KB article 974598, and i tried installing this hotfix on
> > > the server but is says it not applicable for this machine.
> > >
> > > Any ideas?
> >
> > .
> >

Had the same problem on my dl 360 G5. Once I disabled the c3 settings the problems where over. Hope it does the job for you.

> On Thursday, December 17, 2009 7:11 AM Simon wrote:

> Hi Guys/Girls
>
> I am having a problem with my clean install of Hyper-V Server 2008 R2.
>
> Once i enable the 2 options in the BIOS for virtulisation i get a bsod with
> STOP 0x0000007E error message. The server is an HP DL360 G5.
>
> I have found the KB article 974598, and i tried installing this hotfix on
> the server but is says it not applicable for this machine.
>
> Any ideas?


>> On Thursday, December 17, 2009 10:30 AM Charlie Russel - MVP wrote:

>> Make sure that you have installed all the current HP firmware upgrades
>> available for your system, including for the RAID controller and for the
>> iLO.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/russel


>>> On Thursday, December 17, 2009 1:04 PM Simon wrote:

>>> I have checked with the latest firmware cd (8.30) from HP, and everything is
>>> up-to-date.
>>>
>>> "Charlie Russel - MVP" wrote:


>>>> On Saturday, December 19, 2009 6:56 AM ericlaiys wrote:

>>>> Hi,
>>>>
>>>> The update is applies to full version of windows Server 2008. not applicable
>>>> for hyper V 2008 R2 2 (free edition). You can try windows update and patches
>>>> the system. Besides that, may be you should upgrade your BIOS and download
>>>> the latest chipset.
>>>>
>>>> ericlaiys
>>>>
>>>> "Simon" wrote:


>>>> Submitted via EggHeadCafe - Software Developer Portal of Choice
>>>> ASP.NET 4.0 browser capabilities
>>>> http://www.eggheadcafe.com/tutorials...abilities.aspx