Hyper-V Server 2008

OK, I've got Hyper-V Server installed and, after 4 hours of screwing around,
I can now ping it and make a RDP connection to it. However, I still can't
make MMC snapin connections to it. My RDP is from a Vista X64 workstation
and I'm trying to MMC to it from a windows X86 Server 2008. Every snapin
that I've tried says it can't connect.

Anyone got any suggestions about where to look?

Tom Mason

--
ASUS A8N32-SLI Deluxe MB
AMD Athlon 64 X2 CPU 4800+
4GB RAM
nVidia GeForce 8500 GT Video
250 GB SATA II hard drive
Pinnacle PCTV 7010iX TV Tuner

See the excellent series of blog posts from John Howard. There are five in
the series, covering slightly different scenarios. Here's the link to the
first:
http://blogs.technet.com/jhoward/arc...putername.aspx

That's a huge long link, so if all else fails, just go to John Howard's
blog. You'll be able to find it from there.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Tom Mason" <masonth@comcast.net> wrote in message
news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
> around, I can now ping it and make a RDP connection to it. However, I
> still can't make MMC snapin connections to it. My RDP is from a Vista X64
> workstation and I'm trying to MMC to it from a windows X86 Server 2008.
> Every snapin that I've tried says it can't connect.
>
> Anyone got any suggestions about where to look?
>
> Tom Mason
>
> --
> ASUS A8N32-SLI Deluxe MB
> AMD Athlon 64 X2 CPU 4800+
> 4GB RAM
> nVidia GeForce 8500 GT Video
> 250 GB SATA II hard drive
> Pinnacle PCTV 7010iX TV Tuner

"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
news:#in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
> See the excellent series of blog posts from John Howard. There are five in
> the series, covering slightly different scenarios. Here's the link to the
> first:
> http://blogs.technet.com/jhoward/arc...putername.aspx
>
> That's a huge long link, so if all else fails, just go to John Howard's
> blog. You'll be able to find it from there.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Tom Mason" <masonth@comcast.net> wrote in message
> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
>> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
>> around, I can now ping it and make a RDP connection to it. However, I
>> still can't make MMC snapin connections to it. My RDP is from a Vista X64
>> workstation and I'm trying to MMC to it from a windows X86 Server 2008.
>> Every snapin that I've tried says it can't connect.
>>
>> Anyone got any suggestions about where to look?
>>
>> Tom Mason
>>
>> --
>> ASUS A8N32-SLI Deluxe MB
>> AMD Athlon 64 X2 CPU 4800+
>> 4GB RAM
>> nVidia GeForce 8500 GT Video
>> 250 GB SATA II hard drive
>> Pinnacle PCTV 7010iX TV Tuner
>
Is this a workgroup? With a domain it all just works. I remember having
problems trying to do this from Vista into Server 2008 in a workgroup.

It can be a problem in domains, too, though I have seen it "just work"
there. But certainly in a workgroup there are things you need to configure,
or where you're dealing with a separate domain.

IMNSHO, MS needs to make this simpler. But in the mean time, it's possible
following the steps in the series of blog posts.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Bill Grant" <not.available@online> wrote in message
news:%23CF3Qo3JJHA.1556@TK2MSFTNGP03.phx.gbl...
>
>
> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
> news:#in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
>> See the excellent series of blog posts from John Howard. There are five
>> in the series, covering slightly different scenarios. Here's the link to
>> the first:
>> http://blogs.technet.com/jhoward/arc...putername.aspx
>>
>> That's a huge long link, so if all else fails, just go to John Howard's
>> blog. You'll be able to find it from there.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>> "Tom Mason" <masonth@comcast.net> wrote in message
>> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
>>> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
>>> around, I can now ping it and make a RDP connection to it. However, I
>>> still can't make MMC snapin connections to it. My RDP is from a Vista
>>> X64 workstation and I'm trying to MMC to it from a windows X86 Server
>>> 2008. Every snapin that I've tried says it can't connect.
>>>
>>> Anyone got any suggestions about where to look?
>>>
>>> Tom Mason
>>>
>>> --
>>> ASUS A8N32-SLI Deluxe MB
>>> AMD Athlon 64 X2 CPU 4800+
>>> 4GB RAM
>>> nVidia GeForce 8500 GT Video
>>> 250 GB SATA II hard drive
>>> Pinnacle PCTV 7010iX TV Tuner
>>
> Is this a workgroup? With a domain it all just works. I remember having
> problems trying to do this from Vista into Server 2008 in a workgroup.

Thanks, Charlie, That's what I needed.

PS: the computer is part of a domain. And, I didn't have this problem when I
set up a W2K8 Server Core machine.

Tom

--
ASUS A8N32-SLI Deluxe MB
AMD Athlon 64 X2 CPU 4800+
4GB RAM
nVidia GeForce 8500 GT Video
250 GB SATA II hard drive
Pinnacle PCTV 7010iX TV Tuner
"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
news:%23in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
> See the excellent series of blog posts from John Howard. There are five in
> the series, covering slightly different scenarios. Here's the link to the
> first:
> http://blogs.technet.com/jhoward/arc...putername.aspx
>
> That's a huge long link, so if all else fails, just go to John Howard's
> blog. You'll be able to find it from there.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Tom Mason" <masonth@comcast.net> wrote in message
> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
>> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
>> around, I can now ping it and make a RDP connection to it. However, I
>> still can't make MMC snapin connections to it. My RDP is from a Vista X64
>> workstation and I'm trying to MMC to it from a windows X86 Server 2008.
>> Every snapin that I've tried says it can't connect.
>>
>> Anyone got any suggestions about where to look?
>>
>> Tom Mason
>>
>> --
>> ASUS A8N32-SLI Deluxe MB
>> AMD Athlon 64 X2 CPU 4800+
>> 4GB RAM
>> nVidia GeForce 8500 GT Video
>> 250 GB SATA II hard drive
>> Pinnacle PCTV 7010iX TV Tuner
>

I did set up a Hyper-V Server 2008 (baremetal). It is still in a workgroup,
runs fine and I can do a RDP to the machine.
Next to it I put a Vista SP1 with the Hyper-V MMC in the same network range.
Strangly I couldn't connect to the Hyper-V server even though they are in the
same workgroup. I then tried to use the same login/pass on both machines. I
could connect then but I had no permission to manage it... :/

What I really want to do is setting up an SBS2003 on a Hyper-V server.

Vincent

"Charlie Russel - MVP" wrote:

> It can be a problem in domains, too, though I have seen it "just work"
> there. But certainly in a workgroup there are things you need to configure,
> or where you're dealing with a separate domain.
>
> IMNSHO, MS needs to make this simpler. But in the mean time, it's possible
> following the steps in the series of blog posts.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Bill Grant" <not.available@online> wrote in message
> news:%23CF3Qo3JJHA.1556@TK2MSFTNGP03.phx.gbl...
> >
> >
> > "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
> > news:#in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
> >> See the excellent series of blog posts from John Howard. There are five
> >> in the series, covering slightly different scenarios. Here's the link to
> >> the first:
> >> http://blogs.technet.com/jhoward/arc...putername.aspx
> >>
> >> That's a huge long link, so if all else fails, just go to John Howard's
> >> blog. You'll be able to find it from there.
> >>
> >> --
> >> Charlie.
> >> http://msmvps.com/blogs/xperts64
> >> http://mvp.support.microsoft.com/profile/charlie.russel
> >>
> >> "Tom Mason" <masonth@comcast.net> wrote in message
> >> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
> >>> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
> >>> around, I can now ping it and make a RDP connection to it. However, I
> >>> still can't make MMC snapin connections to it. My RDP is from a Vista
> >>> X64 workstation and I'm trying to MMC to it from a windows X86 Server
> >>> 2008. Every snapin that I've tried says it can't connect.
> >>>
> >>> Anyone got any suggestions about where to look?
> >>>
> >>> Tom Mason
> >>>
> >>> --
> >>> ASUS A8N32-SLI Deluxe MB
> >>> AMD Athlon 64 X2 CPU 4800+
> >>> 4GB RAM
> >>> nVidia GeForce 8500 GT Video
> >>> 250 GB SATA II hard drive
> >>> Pinnacle PCTV 7010iX TV Tuner
> >>
> > Is this a workgroup? With a domain it all just works. I remember having
> > problems trying to do this from Vista into Server 2008 in a workgroup.
>
>

Follow the EXACT steps in the blog post series I referenced earlier in the
thread. It works. But it's pretty fussy.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Vincent" <Vincent@discussions.microsoft.com> wrote in message
news:6900AE82-77B4-4153-8997-4EE2A19D8E85@microsoft.com...
>I did set up a Hyper-V Server 2008 (baremetal). It is still in a workgroup,
> runs fine and I can do a RDP to the machine.
> Next to it I put a Vista SP1 with the Hyper-V MMC in the same network
> range.
> Strangly I couldn't connect to the Hyper-V server even though they are in
> the
> same workgroup. I then tried to use the same login/pass on both machines.
> I
> could connect then but I had no permission to manage it... :/
>
> What I really want to do is setting up an SBS2003 on a Hyper-V server.
>
> Vincent
>
> "Charlie Russel - MVP" wrote:
>
>> It can be a problem in domains, too, though I have seen it "just work"
>> there. But certainly in a workgroup there are things you need to
>> configure,
>> or where you're dealing with a separate domain.
>>
>> IMNSHO, MS needs to make this simpler. But in the mean time, it's
>> possible
>> following the steps in the series of blog posts.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>> "Bill Grant" <not.available@online> wrote in message
>> news:%23CF3Qo3JJHA.1556@TK2MSFTNGP03.phx.gbl...
>> >
>> >
>> > "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in
>> > message
>> > news:#in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
>> >> See the excellent series of blog posts from John Howard. There are
>> >> five
>> >> in the series, covering slightly different scenarios. Here's the link
>> >> to
>> >> the first:
>> >> http://blogs.technet.com/jhoward/arc...putername.aspx
>> >>
>> >> That's a huge long link, so if all else fails, just go to John
>> >> Howard's
>> >> blog. You'll be able to find it from there.
>> >>
>> >> --
>> >> Charlie.
>> >> http://msmvps.com/blogs/xperts64
>> >> http://mvp.support.microsoft.com/profile/charlie.russel
>> >>
>> >> "Tom Mason" <masonth@comcast.net> wrote in message
>> >> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
>> >>> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
>> >>> around, I can now ping it and make a RDP connection to it. However, I
>> >>> still can't make MMC snapin connections to it. My RDP is from a Vista
>> >>> X64 workstation and I'm trying to MMC to it from a windows X86 Server
>> >>> 2008. Every snapin that I've tried says it can't connect.
>> >>>
>> >>> Anyone got any suggestions about where to look?
>> >>>
>> >>> Tom Mason
>> >>>
>> >>> --
>> >>> ASUS A8N32-SLI Deluxe MB
>> >>> AMD Athlon 64 X2 CPU 4800+
>> >>> 4GB RAM
>> >>> nVidia GeForce 8500 GT Video
>> >>> 250 GB SATA II hard drive
>> >>> Pinnacle PCTV 7010iX TV Tuner
>> >>
>> > Is this a workgroup? With a domain it all just works. I remember
>> > having
>> > problems trying to do this from Vista into Server 2008 in a workgroup.
>>
>>

Thanks for your reply Charly,

At the first the day I wrote this the blog was down.
Now I gave it a view, but all steps are provided for Windows Server 2008
with HYPER-V enabled. My problem is Windows HYPER-V server (the baremetal
version). I can't manage it with a VISTA SP1. It only works when the HYPER-V
server and Vista are a member of the domain.

Maybe I've missed some things, not sure...

Thanks in advance,
Vincent

"Charlie Russel - MVP" wrote:

> Follow the EXACT steps in the blog post series I referenced earlier in the
> thread. It works. But it's pretty fussy.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Vincent" <Vincent@discussions.microsoft.com> wrote in message
> news:6900AE82-77B4-4153-8997-4EE2A19D8E85@microsoft.com...
> >I did set up a Hyper-V Server 2008 (baremetal). It is still in a workgroup,
> > runs fine and I can do a RDP to the machine.
> > Next to it I put a Vista SP1 with the Hyper-V MMC in the same network
> > range.
> > Strangly I couldn't connect to the Hyper-V server even though they are in
> > the
> > same workgroup. I then tried to use the same login/pass on both machines.
> > I
> > could connect then but I had no permission to manage it... :/
> >
> > What I really want to do is setting up an SBS2003 on a Hyper-V server.
> >
> > Vincent
> >
> > "Charlie Russel - MVP" wrote:
> >
> >> It can be a problem in domains, too, though I have seen it "just work"
> >> there. But certainly in a workgroup there are things you need to
> >> configure,
> >> or where you're dealing with a separate domain.
> >>
> >> IMNSHO, MS needs to make this simpler. But in the mean time, it's
> >> possible
> >> following the steps in the series of blog posts.
> >>
> >> --
> >> Charlie.
> >> http://msmvps.com/blogs/xperts64
> >> http://mvp.support.microsoft.com/profile/charlie.russel
> >>
> >> "Bill Grant" <not.available@online> wrote in message
> >> news:%23CF3Qo3JJHA.1556@TK2MSFTNGP03.phx.gbl...
> >> >
> >> >
> >> > "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in
> >> > message
> >> > news:#in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
> >> >> See the excellent series of blog posts from John Howard. There are
> >> >> five
> >> >> in the series, covering slightly different scenarios. Here's the link
> >> >> to
> >> >> the first:
> >> >> http://blogs.technet.com/jhoward/arc...putername.aspx
> >> >>
> >> >> That's a huge long link, so if all else fails, just go to John
> >> >> Howard's
> >> >> blog. You'll be able to find it from there.
> >> >>
> >> >> --
> >> >> Charlie.
> >> >> http://msmvps.com/blogs/xperts64
> >> >> http://mvp.support.microsoft.com/profile/charlie.russel
> >> >>
> >> >> "Tom Mason" <masonth@comcast.net> wrote in message
> >> >> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
> >> >>> OK, I've got Hyper-V Server installed and, after 4 hours of screwing
> >> >>> around, I can now ping it and make a RDP connection to it. However, I
> >> >>> still can't make MMC snapin connections to it. My RDP is from a Vista
> >> >>> X64 workstation and I'm trying to MMC to it from a windows X86 Server
> >> >>> 2008. Every snapin that I've tried says it can't connect.
> >> >>>
> >> >>> Anyone got any suggestions about where to look?
> >> >>>
> >> >>> Tom Mason
> >> >>>
> >> >>> --
> >> >>> ASUS A8N32-SLI Deluxe MB
> >> >>> AMD Athlon 64 X2 CPU 4800+
> >> >>> 4GB RAM
> >> >>> nVidia GeForce 8500 GT Video
> >> >>> 250 GB SATA II hard drive
> >> >>> Pinnacle PCTV 7010iX TV Tuner
> >> >>
> >> > Is this a workgroup? With a domain it all just works. I remember
> >> > having
> >> > problems trying to do this from Vista into Server 2008 in a workgroup.
> >>
> >>
>
>

There are 5 individual posts in the series. You want the one that has Vista
SP1 and workgroup, and Server Core. That would be part 3 and/or part 5,
depending on how you're configured. (Part 5 is domain joined Vista,
workgroup joined Server

Hyper-V Server is essentially the same as Server 2008 Core with the Hyper-V
Role installed. The one difference is that you can't install any additional
roles on the Hyper-V server. So simply follow the steps for Server Core.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Vincent" <Vincent@discussions.microsoft.com> wrote in message
news:048E952E-545B-41D4-8CD2-44C0184FF8FF@microsoft.com...
> Thanks for your reply Charly,
>
> At the first the day I wrote this the blog was down.
> Now I gave it a view, but all steps are provided for Windows Server 2008
> with HYPER-V enabled. My problem is Windows HYPER-V server (the baremetal
> version). I can't manage it with a VISTA SP1. It only works when the
> HYPER-V
> server and Vista are a member of the domain.
>
> Maybe I've missed some things, not sure...
>
> Thanks in advance,
> Vincent
>
> "Charlie Russel - MVP" wrote:
>
>> Follow the EXACT steps in the blog post series I referenced earlier in
>> the
>> thread. It works. But it's pretty fussy.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>> "Vincent" <Vincent@discussions.microsoft.com> wrote in message
>> news:6900AE82-77B4-4153-8997-4EE2A19D8E85@microsoft.com...
>> >I did set up a Hyper-V Server 2008 (baremetal). It is still in a
>> >workgroup,
>> > runs fine and I can do a RDP to the machine.
>> > Next to it I put a Vista SP1 with the Hyper-V MMC in the same network
>> > range.
>> > Strangly I couldn't connect to the Hyper-V server even though they are
>> > in
>> > the
>> > same workgroup. I then tried to use the same login/pass on both
>> > machines.
>> > I
>> > could connect then but I had no permission to manage it... :/
>> >
>> > What I really want to do is setting up an SBS2003 on a Hyper-V server.
>> >
>> > Vincent
>> >
>> > "Charlie Russel - MVP" wrote:
>> >
>> >> It can be a problem in domains, too, though I have seen it "just work"
>> >> there. But certainly in a workgroup there are things you need to
>> >> configure,
>> >> or where you're dealing with a separate domain.
>> >>
>> >> IMNSHO, MS needs to make this simpler. But in the mean time, it's
>> >> possible
>> >> following the steps in the series of blog posts.
>> >>
>> >> --
>> >> Charlie.
>> >> http://msmvps.com/blogs/xperts64
>> >> http://mvp.support.microsoft.com/profile/charlie.russel
>> >>
>> >> "Bill Grant" <not.available@online> wrote in message
>> >> news:%23CF3Qo3JJHA.1556@TK2MSFTNGP03.phx.gbl...
>> >> >
>> >> >
>> >> > "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in
>> >> > message
>> >> > news:#in9Zj3JJHA.2348@TK2MSFTNGP02.phx.gbl...
>> >> >> See the excellent series of blog posts from John Howard. There are
>> >> >> five
>> >> >> in the series, covering slightly different scenarios. Here's the
>> >> >> link
>> >> >> to
>> >> >> the first:
>> >> >> http://blogs.technet.com/jhoward/arc...putername.aspx
>> >> >>
>> >> >> That's a huge long link, so if all else fails, just go to John
>> >> >> Howard's
>> >> >> blog. You'll be able to find it from there.
>> >> >>
>> >> >> --
>> >> >> Charlie.
>> >> >> http://msmvps.com/blogs/xperts64
>> >> >> http://mvp.support.microsoft.com/profile/charlie.russel
>> >> >>
>> >> >> "Tom Mason" <masonth@comcast.net> wrote in message
>> >> >> news:eOHI$F1JJHA.2208@TK2MSFTNGP02.phx.gbl...
>> >> >>> OK, I've got Hyper-V Server installed and, after 4 hours of
>> >> >>> screwing
>> >> >>> around, I can now ping it and make a RDP connection to it.
>> >> >>> However, I
>> >> >>> still can't make MMC snapin connections to it. My RDP is from a
>> >> >>> Vista
>> >> >>> X64 workstation and I'm trying to MMC to it from a windows X86
>> >> >>> Server
>> >> >>> 2008. Every snapin that I've tried says it can't connect.
>> >> >>>
>> >> >>> Anyone got any suggestions about where to look?
>> >> >>>
>> >> >>> Tom Mason
>> >> >>>
>> >> >>> --
>> >> >>> ASUS A8N32-SLI Deluxe MB
>> >> >>> AMD Athlon 64 X2 CPU 4800+
>> >> >>> 4GB RAM
>> >> >>> nVidia GeForce 8500 GT Video
>> >> >>> 250 GB SATA II hard drive
>> >> >>> Pinnacle PCTV 7010iX TV Tuner
>> >> >>
>> >> > Is this a workgroup? With a domain it all just works. I remember
>> >> > having
>> >> > problems trying to do this from Vista into Server 2008 in a
>> >> > workgroup.
>> >>
>> >>
>>
>>